dmesg - 2011-11-01 07:35
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.0-rc9-1-jan (root@rockerduck.entenhausen.de) (gcc version 4.6.1 20111012 [gcc-4_6-branch revision 179856] (SUSE Linux) ) #3 SMP PREEMPT Sun Oct 30 22:41:05 CET 2011
[ 0.000000] Command line: root=/dev/disk/by-id/ata-ST9500420AS_5VJD19SD-part3 radeon.modeset=0 resume=/dev/disk/by-id/ata-ST9500420AS_5VJD19SD-part5 splash=silent quiet radeon.modeset=0
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000afb3f000 (usable)
[ 0.000000] BIOS-e820: 00000000afb3f000 - 00000000afbbf000 (reserved)
[ 0.000000] BIOS-e820: 00000000afbbf000 - 00000000afebf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000afebf000 - 00000000afef6000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000afef6000 - 00000000aff00000 (usable)
[ 0.000000] BIOS-e820: 00000000aff00000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001af000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP Pavilion dv6 Notebook PC/358D, BIOS F.20 07/13/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x1af000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFE0000000 write-back
[ 0.000000] 2 base 00A0000000 mask FFF0000000 write-back
[ 0.000000] 3 base 00AFEBD000 mask FFFFFFF000 uncachable
[ 0.000000] 4 base 00FFE00000 mask FFFFE00000 write-protect
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 00000001af000000 aka 6896M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xaff00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fe1b0] fe1b0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000aff00000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00afe00000 page 2M
[ 0.000000] 00afe00000 - 00aff00000 page 4k
[ 0.000000] kernel direct mapping tables up to aff00000 @ afefd000-aff00000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001af000000
[ 0.000000] 0100000000 - 0180000000 page 1G
[ 0.000000] 0180000000 - 01af000000 page 2M
[ 0.000000] kernel direct mapping tables up to 1af000000 @ 1aeffe000-1af000000
[ 0.000000] RAMDISK: 37405000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 00000000afef5120 0007C (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 00000000afef4000 000F4 (v04 HPQOEM SLIC-MPC 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 00000000afede000 1149A (v01 HP INSYDE F0000000 ACPI 00040000)
[ 0.000000] ACPI: FACS 00000000afc95000 00040
[ 0.000000] ACPI: HPET 00000000afef3000 00038 (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 00000000afef2000 00084 (v02 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 00000000afef1000 0003C (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 00000000afef0000 000A5 (v32 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 00000000afedd000 00028 (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: SLIC 00000000afedc000 00176 (v01 HPQOEM SLIC-MPC 00000001 ACPI 00040000)
[ 0.000000] ACPI: WDRT 00000000afedb000 00047 (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: MSDM 00000000afeda000 00055 (v03 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000afed9000 00E28 (v01 HP INSYDE 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 00000000afed7000 0190A (v02 HP INSYDE 00000001 MSFT 04000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001af000000
[ 0.000000] Initmem setup node 0 0000000000000000-00000001af000000
[ 0.000000] NODE_DATA [00000001aefea000 - 00000001aeffdfff]
[ 0.000000] [ffffea0000000000-ffffea0006bfffff] PMD -> [ffff8801a8e00000-ffff8801ae5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001af000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000afb3f
[ 0.000000] 0: 0x000afef6 -> 0x000aff00
[ 0.000000] 0: 0x00100000 -> 0x001af000
[ 0.000000] On node 0 totalpages: 1436376
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 699273 pages, LIFO batch:31
[ 0.000000] Normal zone: 11200 pages used for memmap
[ 0.000000] Normal zone: 705600 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000afb3f000 - 00000000afbbf000
[ 0.000000] PM: Registered nosave memory: 00000000afbbf000 - 00000000afebf000
[ 0.000000] PM: Registered nosave memory: 00000000afebf000 - 00000000afef6000
[ 0.000000] PM: Registered nosave memory: 00000000aff00000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
[ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:28000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff8801aec00000 s77440 r8192 d20864 u524288
[ 0.000000] pcpu-alloc: s77440 r8192 d20864 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1408787
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-ST9500420AS_5VJD19SD-part3 radeon.modeset=0 resume=/dev/disk/by-id/ata-ST9500420AS_5VJD19SD-part5 splash=silent quiet radeon.modeset=0
[ 0.000000] bootsplash: silent mode.
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 5562580k/7061504k available (5722k kernel code, 1316000k absent, 182924k reserved, 5769k data, 768k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 46137344 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1597.421 MHz processor.
[ 0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3194.84 BogoMIPS (lpj=1597421)
[ 0.001008] pid_max: default: 32768 minimum: 301
[ 0.001036] Security Framework initialized
[ 0.001056] AppArmor: AppArmor initialized
[ 0.002999] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.006133] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.007449] Mount-cache hash table entries: 256
[ 0.007604] Initializing cgroup subsys cpuacct
[ 0.007610] Initializing cgroup subsys memory
[ 0.007625] Initializing cgroup subsys devices
[ 0.007628] Initializing cgroup subsys freezer
[ 0.007630] Initializing cgroup subsys net_cls
[ 0.007633] Initializing cgroup subsys blkio
[ 0.007640] Initializing cgroup subsys perf_event
[ 0.007673] tseg: 00aff00000
[ 0.007676] CPU: Physical Processor ID: 0
[ 0.007677] CPU: Processor Core ID: 0
[ 0.007680] mce: CPU supports 6 MCE banks
[ 0.008935] ACPI: Core revision 20110623
[ 0.020335] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.030346] CPU0: AMD A6-3410MX APU with Radeon(tm) HD Graphics stepping 00
[ 0.030997] Performance Events: AMD PMU driver.
[ 0.030997] ... version: 0
[ 0.030997] ... bit width: 48
[ 0.030997] ... generic registers: 4
[ 0.030997] ... value mask: 0000ffffffffffff
[ 0.030997] ... max period: 00007fffffffffff
[ 0.030997] ... fixed-purpose events: 0
[ 0.030997] ... event mask: 000000000000000f
[ 0.038635] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.046030] Booting Node 0, Processors #1
[ 0.046040] smpboot cpu 1: start_ip = 9a000
[ 0.118016] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.124024] #2
[ 0.124028] smpboot cpu 2: start_ip = 9a000
[ 0.195999] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.202026] #3 Ok.
[ 0.202033] smpboot cpu 3: start_ip = 9a000
[ 0.273997] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.275975] Brought up 4 CPUs
[ 0.275981] Total of 4 processors activated (12777.00 BogoMIPS).
[ 0.277072] devtmpfs: initialized
[ 0.279417] PM: Registering ACPI NVS region at afbbf000 (3145728 bytes)
[ 0.279417] print_constraints: dummy:
[ 0.279417] RTC time: 8:24:37, date: 11/01/11
[ 0.279417] NET: Registered protocol family 16
[ 0.280058] Extended Config Space enabled on 0 nodes
[ 0.280159] ACPI: bus type pci registered
[ 0.280290] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.280294] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.289127] PCI: Using configuration type 1 for base access
[ 0.290014] bio: create slab at 0
[ 0.290044] ACPI: Added _OSI(Module Device)
[ 0.290047] ACPI: Added _OSI(Processor Device)
[ 0.290049] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.290051] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.293223] ACPI: EC: Look up EC in DSDT
[ 0.296302] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.303671] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.310134] ACPI: Interpreter enabled
[ 0.310142] ACPI: (supports S0 S3 S4 S5)
[ 0.310186] ACPI: Using IOAPIC for interrupt routing
[ 0.325753] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.326141] ACPI: No dock devices found.
[ 0.326143] HEST: Table not found.
[ 0.326147] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.326396] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.326598] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.326601] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.326605] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.326608] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[ 0.326611] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[ 0.326614] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[ 0.326617] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[ 0.326619] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.326622] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.326625] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.326628] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.326631] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.326634] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 0.326637] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[ 0.326640] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[ 0.326643] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xf7ffffff]
[ 0.326646] pci_root PNP0A08:00: host bridge window [mem 0xfc000000-0xfed3ffff]
[ 0.326648] pci_root PNP0A08:00: host bridge window [mem 0xfed45000-0xffffffff]
[ 0.326657] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])
[ 0.326673] pci 0000:00:00.0: [1022:1705] type 0 class 0x000600
[ 0.326716] pci 0000:00:01.0: [1002:9647] type 0 class 0x000300
[ 0.326727] pci 0000:00:01.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[ 0.326735] pci 0000:00:01.0: reg 14: [io 0x4000-0x40ff]
[ 0.326743] pci 0000:00:01.0: reg 18: [mem 0xf0400000-0xf043ffff]
[ 0.326781] pci 0000:00:01.0: supports D1 D2
[ 0.326800] pci 0000:00:01.1: [1002:1714] type 0 class 0x000403
[ 0.326810] pci 0000:00:01.1: reg 10: [mem 0xf0444000-0xf0447fff]
[ 0.326857] pci 0000:00:01.1: supports D1 D2
[ 0.326881] pci 0000:00:02.0: [1022:1707] type 1 class 0x000604
[ 0.326929] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.326933] pci 0000:00:02.0: PME# disabled
[ 0.326974] pci 0000:00:04.0: [1022:1709] type 1 class 0x000604
[ 0.327022] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.327025] pci 0000:00:04.0: PME# disabled
[ 0.327049] pci 0000:00:05.0: [1022:170a] type 1 class 0x000604
[ 0.327096] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.327100] pci 0000:00:05.0: PME# disabled
[ 0.327122] pci 0000:00:06.0: [1022:170b] type 1 class 0x000604
[ 0.327170] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.327173] pci 0000:00:06.0: PME# disabled
[ 0.327276] pci 0000:00:10.0: [1022:7812] type 0 class 0x000c03
[ 0.327305] pci 0000:00:10.0: reg 10: [mem 0xf0448000-0xf0449fff 64bit]
[ 0.327422] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.327428] pci 0000:00:10.0: PME# disabled
[ 0.327488] pci 0000:00:10.1: [1022:7812] type 0 class 0x000c03
[ 0.327516] pci 0000:00:10.1: reg 10: [mem 0xf044a000-0xf044bfff 64bit]
[ 0.327630] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[ 0.327636] pci 0000:00:10.1: PME# disabled
[ 0.327684] pci 0000:00:11.0: [1022:7804] type 0 class 0x000106
[ 0.327707] pci 0000:00:11.0: reg 10: [io 0x4138-0x413f]
[ 0.327719] pci 0000:00:11.0: reg 14: [io 0x414c-0x414f]
[ 0.327730] pci 0000:00:11.0: reg 18: [io 0x4130-0x4137]
[ 0.327742] pci 0000:00:11.0: reg 1c: [io 0x4148-0x414b]
[ 0.327753] pci 0000:00:11.0: reg 20: [io 0x4110-0x411f]
[ 0.327765] pci 0000:00:11.0: reg 24: [mem 0xf0450000-0xf04507ff]
[ 0.327819] pci 0000:00:12.0: [1022:7807] type 0 class 0x000c03
[ 0.327835] pci 0000:00:12.0: reg 10: [mem 0xf044f000-0xf044ffff]
[ 0.327918] pci 0000:00:12.2: [1022:7808] type 0 class 0x000c03
[ 0.328715] pci 0000:00:12.2: reg 10: [mem 0xf044e000-0xf044e0ff]
[ 0.333028] pci 0000:00:12.2: supports D1 D2
[ 0.333034] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.333041] pci 0000:00:12.2: PME# disabled
[ 0.333073] pci 0000:00:13.0: [1022:7807] type 0 class 0x000c03
[ 0.333091] pci 0000:00:13.0: reg 10: [mem 0xf044d000-0xf044dfff]
[ 0.333174] pci 0000:00:13.2: [1022:7808] type 0 class 0x000c03
[ 0.333976] pci 0000:00:13.2: reg 10: [mem 0xf044c000-0xf044c0ff]
[ 0.338769] pci 0000:00:13.2: supports D1 D2
[ 0.338775] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.338781] pci 0000:00:13.2: PME# disabled
[ 0.338814] pci 0000:00:14.0: [1022:780b] type 0 class 0x000c05
[ 0.338900] pci 0000:00:14.1: [1022:780c] type 0 class 0x000101
[ 0.338917] pci 0000:00:14.1: reg 10: [io 0x4128-0x412f]
[ 0.338928] pci 0000:00:14.1: reg 14: [io 0x4144-0x4147]
[ 0.338940] pci 0000:00:14.1: reg 18: [io 0x4120-0x4127]
[ 0.338974] pci 0000:00:14.1: reg 1c: [io 0x4140-0x4143]
[ 0.338985] pci 0000:00:14.1: reg 20: [io 0x4100-0x410f]
[ 0.339038] pci 0000:00:14.2: [1022:780d] type 0 class 0x000403
[ 0.339063] pci 0000:00:14.2: reg 10: [mem 0xf0440000-0xf0443fff 64bit]
[ 0.339130] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.339135] pci 0000:00:14.2: PME# disabled
[ 0.339152] pci 0000:00:14.3: [1022:780e] type 0 class 0x000601
[ 0.339238] pci 0000:00:14.4: [1022:780f] type 1 class 0x000604
[ 0.339293] pci 0000:00:18.0: [1022:1700] type 0 class 0x000600
[ 0.339330] pci 0000:00:18.1: [1022:1701] type 0 class 0x000600
[ 0.339364] pci 0000:00:18.2: [1022:1702] type 0 class 0x000600
[ 0.339398] pci 0000:00:18.3: [1022:1703] type 0 class 0x000600
[ 0.339439] pci 0000:00:18.4: [1022:1704] type 0 class 0x000600
[ 0.339473] pci 0000:00:18.5: [1022:1718] type 0 class 0x000600
[ 0.339506] pci 0000:00:18.6: [1022:1716] type 0 class 0x000600
[ 0.339539] pci 0000:00:18.7: [1022:1719] type 0 class 0x000600
[ 0.339675] pci 0000:01:00.0: [1002:6741] type 0 class 0x000300
[ 0.339693] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.339707] pci 0000:01:00.0: reg 18: [mem 0xf0300000-0xf031ffff 64bit]
[ 0.339717] pci 0000:01:00.0: reg 20: [io 0x3000-0x30ff]
[ 0.339734] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.339758] pci 0000:01:00.0: supports D1 D2
[ 0.341003] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.341018] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
[ 0.341027] pci 0000:00:02.0: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.341038] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.341124] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[ 0.341142] pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.341169] pci 0000:02:00.0: reg 18: [mem 0xf0004000-0xf0004fff 64bit pref]
[ 0.341187] pci 0000:02:00.0: reg 20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.341239] pci 0000:02:00.0: supports D1 D2
[ 0.341242] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.341248] pci 0000:02:00.0: PME# disabled
[ 0.342978] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.342987] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
[ 0.342999] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.343078] pci 0000:03:00.0: [1814:5390] type 0 class 0x000280
[ 0.343097] pci 0000:03:00.0: reg 10: [mem 0xf0200000-0xf020ffff]
[ 0.344977] pci 0000:00:05.0: PCI bridge to [bus 03-03]
[ 0.344989] pci 0000:00:05.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.345071] pci 0000:04:00.0: [10ec:5209] type 0 class 0x00ff00
[ 0.345094] pci 0000:04:00.0: reg 10: [mem 0xf0100000-0xf0100fff]
[ 0.345187] pci 0000:04:00.0: supports D1 D2
[ 0.345189] pci 0000:04:00.0: PME# supported from D1 D2 D3hot
[ 0.345195] pci 0000:04:00.0: PME# disabled
[ 0.346982] pci 0000:00:06.0: PCI bridge to [bus 04-04]
[ 0.346993] pci 0000:00:06.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.347125] pci 0000:00:14.4: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.347137] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.347140] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.347143] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.347146] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.347150] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.347153] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.347156] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.347159] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.347162] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.347165] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.347168] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.347171] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.347174] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.347177] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 0.347180] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xf7ffffff] (subtractive decode)
[ 0.347183] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode)
[ 0.347187] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)
[ 0.347266] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.347492] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2_._PRT]
[ 0.347549] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 0.347592] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 0.347634] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 0.347753] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.347966] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.348241] pci0000:00: ACPI _OSC control (0x19) granted
[ 0.362893] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.362986] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.363074] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.363160] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.363230] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.363284] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.363346] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.363400] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.363462] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.363462] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.363462] vgaarb: loaded
[ 0.363462] vgaarb: bridge control possible 0000:01:00.0
[ 0.363462] vgaarb: bridge control possible 0000:00:01.0
[ 0.363462] SCSI subsystem initialized
[ 0.363462] libata version 3.00 loaded.
[ 0.363462] usbcore: registered new interface driver usbfs
[ 0.363462] usbcore: registered new interface driver hub
[ 0.363970] usbcore: registered new device driver usb
[ 0.364014] PCI: Using ACPI for IRQ routing
[ 0.366390] PCI: pci_cache_line_size set to 64 bytes
[ 0.366515] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.366519] reserve RAM buffer: 00000000afb3f000 - 00000000afffffff
[ 0.366522] reserve RAM buffer: 00000000aff00000 - 00000000afffffff
[ 0.366525] reserve RAM buffer: 00000001af000000 - 00000001afffffff
[ 0.366627] NetLabel: Initializing
[ 0.366629] NetLabel: domain hash size = 128
[ 0.366631] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.366644] NetLabel: unlabeled traffic allowed by default
[ 0.366699] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.366704] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.367971] Switching to clocksource hpet
[ 0.368051] Switched to NOHz mode on CPU #0
[ 0.368188] Switched to NOHz mode on CPU #3
[ 0.368198] Switched to NOHz mode on CPU #2
[ 0.368210] Switched to NOHz mode on CPU #1
[ 0.370445] AppArmor: AppArmor Filesystem Enabled
[ 0.370478] pnp: PnP ACPI init
[ 0.370497] ACPI: bus type pnp registered
[ 0.370668] pnp 00:00: [bus 00-ff]
[ 0.370671] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.370674] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.370677] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.370682] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.370685] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.370688] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.370690] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.370693] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.370695] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.370698] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.370701] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.370703] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.370706] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.370709] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.370711] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.370714] pnp 00:00: [mem 0xd0000000-0xf7ffffff window]
[ 0.370716] pnp 00:00: [mem 0xfc000000-0xfed3ffff window]
[ 0.370719] pnp 00:00: [mem 0xfed45000-0xffffffff window]
[ 0.370722] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.370815] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.370886] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.370889] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.370892] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[ 0.370894] pnp 00:01: [mem 0xfed80000-0xfed80fff]
[ 0.370897] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.370962] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.370966] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.370969] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.370973] system 00:01: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.370976] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.370980] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.371327] pnp 00:02: [irq 0 disabled]
[ 0.371340] pnp 00:02: [irq 8]
[ 0.371342] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[ 0.371379] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.371511] pnp 00:03: [io 0x0000-0x000f]
[ 0.371514] pnp 00:03: [io 0x0081-0x008f]
[ 0.371516] pnp 00:03: [io 0x00c0-0x00df]
[ 0.371519] pnp 00:03: [dma 4]
[ 0.371568] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.371580] pnp 00:04: [io 0x00f0-0x00fe]
[ 0.371586] pnp 00:04: [irq 13]
[ 0.371632] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.371729] pnp 00:05: [io 0x0070-0x0071]
[ 0.371780] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.371794] pnp 00:06: [io 0x0060]
[ 0.371796] pnp 00:06: [io 0x0064]
[ 0.371848] pnp 00:06: [irq 1]
[ 0.371897] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.371958] pnp 00:07: [irq 12]
[ 0.372065] pnp 00:07: Plug and Play ACPI device, IDs SYN1e46 SYN1e00 SYN0002 PNP0f13 (active)
[ 0.372082] pnp 00:08: [io 0x0010-0x001f]
[ 0.372084] pnp 00:08: [io 0x002e-0x002f]
[ 0.372087] pnp 00:08: [io 0x0072-0x0073]
[ 0.372089] pnp 00:08: [io 0x0080]
[ 0.372091] pnp 00:08: [io 0x00b0-0x00b1]
[ 0.372093] pnp 00:08: [io 0x0092]
[ 0.372095] pnp 00:08: [io 0x0400-0x04cf]
[ 0.372100] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.372102] pnp 00:08: [io 0x04d6]
[ 0.372104] pnp 00:08: [io 0x0680-0x06ff]
[ 0.372106] pnp 00:08: [io 0x077a]
[ 0.372109] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.372111] pnp 00:08: [io 0x0c14]
[ 0.372113] pnp 00:08: [io 0x0c50-0x0c52]
[ 0.372115] pnp 00:08: [io 0x0c6c]
[ 0.372117] pnp 00:08: [io 0x0c6f]
[ 0.372119] pnp 00:08: [io 0x0cd0-0x0cdb]
[ 0.372121] pnp 00:08: [io 0x0840-0x0847]
[ 0.372213] system 00:08: [io 0x0400-0x04cf] has been reserved
[ 0.372216] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.372219] system 00:08: [io 0x04d6] has been reserved
[ 0.372222] system 00:08: [io 0x0680-0x06ff] has been reserved
[ 0.372225] system 00:08: [io 0x077a] has been reserved
[ 0.372228] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.372231] system 00:08: [io 0x0c14] has been reserved
[ 0.372234] system 00:08: [io 0x0c50-0x0c52] has been reserved
[ 0.372237] system 00:08: [io 0x0c6c] has been reserved
[ 0.372240] system 00:08: [io 0x0c6f] has been reserved
[ 0.372243] system 00:08: [io 0x0cd0-0x0cdb] has been reserved
[ 0.372246] system 00:08: [io 0x0840-0x0847] has been reserved
[ 0.372249] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.372316] pnp 00:09: [mem 0x000e0000-0x000fffff]
[ 0.372319] pnp 00:09: [mem 0xffe00000-0xffffffff]
[ 0.372390] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.372393] system 00:09: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.372397] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.374235] pnp 00:0a: [irq 23]
[ 0.374358] pnp 00:0a: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 0.374377] pnp: PnP ACPI: found 11 devices
[ 0.374379] ACPI: ACPI bus type pnp unregistered
[ 0.383000] PCI: max bus depth: 1 pci_try_num: 2
[ 0.383052] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0320000-0xf033ffff pref]
[ 0.383057] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.383061] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
[ 0.383066] pci 0000:00:02.0: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.383070] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.383076] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.383079] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
[ 0.383085] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.383091] pci 0000:00:05.0: PCI bridge to [bus 03-03]
[ 0.383096] pci 0000:00:05.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.383103] pci 0000:00:06.0: PCI bridge to [bus 04-04]
[ 0.383107] pci 0000:00:06.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.383115] pci 0000:00:14.4: PCI bridge to [bus 05-05]
[ 0.383197] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.383203] pci 0000:00:02.0: setting latency timer to 64
[ 0.383210] pci 0000:00:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.383214] pci 0000:00:04.0: setting latency timer to 64
[ 0.383225] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.383229] pci 0000:00:05.0: setting latency timer to 64
[ 0.383235] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.383239] pci 0000:00:06.0: setting latency timer to 64
[ 0.383249] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.383252] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.383255] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.383258] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.383260] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.383263] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.383266] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.383268] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.383271] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.383274] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.383277] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.383279] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.383282] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.383285] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 0.383288] pci_bus 0000:00: resource 18 [mem 0xd0000000-0xf7ffffff]
[ 0.383290] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff]
[ 0.383293] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]
[ 0.383296] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.383299] pci_bus 0000:01: resource 1 [mem 0xf0300000-0xf03fffff]
[ 0.383302] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.383305] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.383308] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.383311] pci_bus 0000:03: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.383314] pci_bus 0000:04: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.383317] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.383320] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.383322] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.383325] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.383328] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.383330] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.383333] pci_bus 0000:05: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.383336] pci_bus 0000:05: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.383339] pci_bus 0000:05: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.383341] pci_bus 0000:05: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.383344] pci_bus 0000:05: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.383347] pci_bus 0000:05: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.383350] pci_bus 0000:05: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.383352] pci_bus 0000:05: resource 17 [mem 0x000ec000-0x000effff]
[ 0.383355] pci_bus 0000:05: resource 18 [mem 0xd0000000-0xf7ffffff]
[ 0.383358] pci_bus 0000:05: resource 19 [mem 0xfc000000-0xfed3ffff]
[ 0.383361] pci_bus 0000:05: resource 20 [mem 0xfed45000-0xffffffff]
[ 0.383409] NET: Registered protocol family 2
[ 0.383722] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.385621] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.388890] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.389384] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.389387] TCP reno registered
[ 0.389414] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.389498] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.389660] NET: Registered protocol family 1
[ 0.389679] pci 0000:00:01.0: Boot video device
[ 0.446158] PCI: CLS 64 bytes, default 64
[ 0.446226] Unpacking initramfs...
[ 0.742696] Freeing initrd memory: 12204k freed
[ 0.746559] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.746565] Placing 64MB software IO TLB between ffff8800abb3f000 - ffff8800afb3f000
[ 0.746568] software IO TLB at phys 0xabb3f000 - 0xafb3f000
[ 0.746661] Simple Boot Flag at 0x44 set to 0x1
[ 0.747924] audit: initializing netlink socket (disabled)
[ 0.747942] type=2000 audit(1320135877.746:1): initialized
[ 0.786782] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.816420] VFS: Disk quotas dquot_6.5.2
[ 0.816504] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.816960] msgmni has been set to 10888
[ 0.817576] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.817669] io scheduler noop registered
[ 0.817671] io scheduler deadline registered
[ 0.817719] io scheduler cfq registered (default)
[ 0.817862] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.817910] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.818283] ERST: Table is not found!
[ 0.818285] GHES: HEST is not enabled!
[ 0.947033] Non-volatile memory driver v1.3
[ 0.947037] Linux agpgart interface v0.103
[ 0.947173] ahci 0000:00:11.0: version 3.0
[ 0.947244] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.947344] ahci 0000:00:11.0: irq 41 for MSI/MSI-X
[ 0.947408] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x5 impl SATA mode
[ 0.947412] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 0.947831] scsi0 : ahci
[ 0.948109] scsi1 : ahci
[ 0.948274] scsi2 : ahci
[ 0.948582] ata1: SATA max UDMA/133 abar m2048@0xf0450000 port 0xf0450100 irq 41
[ 0.948585] ata2: DUMMY
[ 0.948588] ata3: SATA max UDMA/133 abar m2048@0xf0450000 port 0xf0450200 irq 41
[ 0.948679] Fixed MDIO Bus: probed
[ 0.948685] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.948703] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.948730] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 0.948760] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.948769] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.948794] QUIRK: Enable AMD PLL fix
[ 0.948806] ehci_hcd 0000:00:12.2: debug port 1
[ 0.948837] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf044e000
[ 0.954076] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.954119] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.954125] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.954131] usb usb1: Product: EHCI Host Controller
[ 0.954136] usb usb1: Manufacturer: Linux 3.1.0-rc9-1-jan ehci_hcd
[ 0.954141] usb usb1: SerialNumber: 0000:00:12.2
[ 0.954392] hub 1-0:1.0: USB hub found
[ 0.954398] hub 1-0:1.0: 5 ports detected
[ 0.954567] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.954588] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.954595] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.954603] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.954622] ehci_hcd 0000:00:13.2: debug port 1
[ 0.954635] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf044c000
[ 0.960119] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.960167] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.960170] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.960173] usb usb2: Product: EHCI Host Controller
[ 0.960176] usb usb2: Manufacturer: Linux 3.1.0-rc9-1-jan ehci_hcd
[ 0.960178] usb usb2: SerialNumber: 0000:00:13.2
[ 0.960469] hub 2-0:1.0: USB hub found
[ 0.960476] hub 2-0:1.0: 5 ports detected
[ 0.960605] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.960671] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.960697] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.960704] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 0.960737] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf044f000
[ 1.015192] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.015196] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.015202] usb usb3: Product: OHCI Host Controller
[ 1.015204] usb usb3: Manufacturer: Linux 3.1.0-rc9-1-jan ohci_hcd
[ 1.015207] usb usb3: SerialNumber: 0000:00:12.0
[ 1.015467] hub 3-0:1.0: USB hub found
[ 1.015523] hub 3-0:1.0: 5 ports detected
[ 1.015675] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.015705] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.015714] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 1.015736] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf044d000
[ 1.070201] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.070205] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.070207] usb usb4: Product: OHCI Host Controller
[ 1.070209] usb usb4: Manufacturer: Linux 3.1.0-rc9-1-jan ohci_hcd
[ 1.070211] usb usb4: SerialNumber: 0000:00:13.0
[ 1.070558] hub 4-0:1.0: USB hub found
[ 1.070614] hub 4-0:1.0: 5 ports detected
[ 1.070763] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.070803] Initializing USB Mass Storage driver...
[ 1.070833] usbcore: registered new interface driver usb-storage
[ 1.070835] USB Mass Storage support registered.
[ 1.070845] usbcore: registered new interface driver ums-alauda
[ 1.070854] usbcore: registered new interface driver ums-cypress
[ 1.070864] usbcore: registered new interface driver ums-datafab
[ 1.070873] usbcore: registered new interface driver ums-freecom
[ 1.070883] usbcore: registered new interface driver ums-isd200
[ 1.070896] usbcore: registered new interface driver ums-jumpshot
[ 1.070906] usbcore: registered new interface driver ums-karma
[ 1.070915] usbcore: registered new interface driver ums-onetouch
[ 1.070925] usbcore: registered new interface driver ums-sddr09
[ 1.070935] usbcore: registered new interface driver ums-sddr55
[ 1.070944] usbcore: registered new interface driver ums-usbat
[ 1.070988] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.079570] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.079598] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.079864] mousedev: PS/2 mouse device common for all mice
[ 1.080053] rtc_cmos 00:05: RTC can wake from S4
[ 1.080191] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.080216] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.080226] cpuidle: using governor ladder
[ 1.080228] cpuidle: using governor menu
[ 1.080231] EFI Variables Facility v0.08 2004-May-17
[ 1.080470] usbcore: registered new interface driver usbhid
[ 1.080472] usbhid: USB HID core driver
[ 1.080739] TCP cubic registered
[ 1.080855] NET: Registered protocol family 10
[ 1.081428] lib80211: common routines for IEEE802.11 drivers
[ 1.081430] lib80211_crypt: registered algorithm 'NULL'
[ 1.081433] Registering the dns_resolver key type
[ 1.081455] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
[ 1.081740] PM: Checking hibernation image partition /dev/disk/by-id/ata-ST9500420AS_5VJD19SD-part5
[ 1.084741] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.307104] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 1.408246] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.409245] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.409443] ata1.00: ATA-8: ST9500420AS, 0006HPM1, max UDMA/100
[ 1.409453] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.410630] ata1.00: configured for UDMA/100
[ 1.411105] scsi 0:0:0:0: Direct-Access ATA ST9500420AS 0006 PQ: 0 ANSI: 5
[ 1.411519] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.411813] sd 0:0:0:0: [sda] Write Protect is off
[ 1.411818] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.411860] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.420790] ata3.00: ATAPI: hp CDDVDW TS-L633J, HH00, max UDMA/100
[ 1.433788] ata3.00: configured for UDMA/100
[ 1.440095] scsi 2:0:0:0: CD-ROM hp CDDVDW TS-L633J HH00 PQ: 0 ANSI: 5
[ 1.485274] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 1.486958] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.519791] usb 2-1: New USB device found, idVendor=5986, idProduct=02ac
[ 1.519801] usb 2-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.519808] usb 2-1: Product: HP TrueVision HD
[ 1.519813] usb 2-1: Manufacturer: HP TrueVision HD
[ 1.519817] usb 2-1: SerialNumber: 0x0003
[ 1.748066] Refined TSC clocksource calibration: 1597.095 MHz.
[ 1.748075] Switching to clocksource tsc
[ 1.850122] usb 4-2: new full speed USB device number 2 using ohci_hcd
[ 1.970832] Synaptics Touchpad, model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
[ 1.997227] usb 4-2: New USB device found, idVendor=138a, idProduct=0018
[ 1.997237] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 1.997243] usb 4-2: SerialNumber: db2e6e0ce550
[ 2.022237] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
[ 2.026572] PM: Hibernation image not present or could not be loaded.
[ 2.026629] registered taskstats version 1
[ 2.040584] Magic number: 3:326:421
[ 2.040740] rtc_cmos 00:05: setting system clock to 2011-11-01 08:24:39 UTC (1320135879)
[ 2.042346] Freeing unused kernel memory: 768k freed
[ 2.042547] Write protecting the kernel read-only data: 10240k
[ 2.044347] Freeing unused kernel memory: 404k freed
[ 2.044597] Freeing unused kernel memory: 12k freed
[ 2.081465] pata_atiixp 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.081807] scsi3 : pata_atiixp
[ 2.081917] scsi4 : pata_atiixp
[ 2.082755] ata4: PATA max UDMA/100 cmd 0x4128 ctl 0x4144 bmdma 0x4100 irq 17
[ 2.082758] ata5: PATA max UDMA/100 cmd 0x4120 ctl 0x4140 bmdma 0x4108 irq 17
[ 2.226117] usb 3-1: new low speed USB device number 2 using ohci_hcd
[ 2.265171] udevd[97]: starting version 173
[ 2.282359] ACPI: acpi_idle registered with cpuidle
[ 2.315997] ACPI Warning: For \_TZ_.THRM._AL0: Return Package has no elements (empty) (20110623/nspredef-463)
[ 2.316172] ACPI: [Package] has zero elements (ffff8801a1e5fdc0)
[ 2.316218] ACPI: Invalid active0 threshold
[ 2.322872] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.322879] ACPI: Thermal Zone [THRM] (58 C)
[ 2.378193] usb 3-1: New USB device found, idVendor=046d, idProduct=c03e
[ 2.378204] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.378210] usb 3-1: Product: USB-PS/2 Optical Mouse
[ 2.378215] usb 3-1: Manufacturer: Logitech
[ 2.386445] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input2
[ 2.386845] generic-usb 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-1/input0
[ 3.103390] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 3.103396] PM: Marking nosave pages: 00000000afb3f000 - 00000000afef6000
[ 3.103412] PM: Marking nosave pages: 00000000aff00000 - 0000000100000000
[ 3.104767] PM: Basic memory bitmaps created
[ 3.130500] PM: Basic memory bitmaps freed
[ 3.185380] PM: Starting manual resume from disk
[ 3.185385] PM: Hibernation image partition 8:5 present
[ 3.185386] PM: Looking for hibernation image.
[ 3.194535] PM: Image not found (code -22)
[ 3.194540] PM: Hibernation image not present or could not be loaded.
[ 3.300527] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 4.213402] systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; suse)
[ 4.606678] systemd[1]: Set hostname to .
[ 6.279558] systemd[1]: [/etc/init.d/cups:19] Failed to add LSB Provides name cupsd.service, ignoring: File exists
[ 6.461652] systemd-readahead-replay[344]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day.
[ 7.818971] udevd[347]: starting version 173
[ 9.821023] boot.localnet[359]: Using boot-specified hostname 'rockerduck.entenhausen.de'
[ 9.821036] boot.localnet[359]: Setting up hostname 'rockerduck'..done
[ 9.821042] boot.localnet[359]: Setting up loopback interface RTNETLINK answers: File exists
[ 9.821048] boot.localnet[359]: ..done
[ 13.049510] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 13.052506] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 13.054276] xhci_hcd 0000:00:10.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 13.054305] xhci_hcd 0000:00:10.0: setting latency timer to 64
[ 13.054309] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 13.054326] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
[ 13.054544] xhci_hcd 0000:00:10.0: irq 18, io mem 0xf0448000
[ 13.054614] xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
[ 13.054621] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
[ 13.054628] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
[ 13.054636] xhci_hcd 0000:00:10.0: irq 45 for MSI/MSI-X
[ 13.054642] xhci_hcd 0000:00:10.0: irq 46 for MSI/MSI-X
[ 13.055221] ACPI: Power Button [PWRB]
[ 13.055359] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[ 13.058745] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 13.058749] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.058753] usb usb5: Product: xHCI Host Controller
[ 13.058756] usb usb5: Manufacturer: Linux 3.1.0-rc9-1-jan xhci_hcd
[ 13.058758] usb usb5: SerialNumber: 0000:00:10.0
[ 13.059158] xHCI xhci_add_endpoint called for root hub
[ 13.059160] xHCI xhci_check_bandwidth called for root hub
[ 13.059190] hub 5-0:1.0: USB hub found
[ 13.059212] hub 5-0:1.0: 2 ports detected
[ 13.059282] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 13.059290] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
[ 13.059368] ACPI: Lid Switch [LID]
[ 13.059376] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 13.059380] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.059382] usb usb6: Product: xHCI Host Controller
[ 13.059385] usb usb6: Manufacturer: Linux 3.1.0-rc9-1-jan xhci_hcd
[ 13.059387] usb usb6: SerialNumber: 0000:00:10.0
[ 13.059524] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 13.059608] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 13.059644] xHCI xhci_add_endpoint called for root hub
[ 13.059647] xHCI xhci_check_bandwidth called for root hub
[ 13.061123] hub 6-0:1.0: USB hub found
[ 13.061151] hub 6-0:1.0: 2 ports detected
[ 13.061328] xhci_hcd 0000:00:10.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 13.061432] xhci_hcd 0000:00:10.1: setting latency timer to 64
[ 13.061437] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 13.061450] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 7
[ 13.061666] xhci_hcd 0000:00:10.1: irq 17, io mem 0xf044a000
[ 13.062232] xhci_hcd 0000:00:10.1: irq 47 for MSI/MSI-X
[ 13.062240] xhci_hcd 0000:00:10.1: irq 48 for MSI/MSI-X
[ 13.062247] xhci_hcd 0000:00:10.1: irq 49 for MSI/MSI-X
[ 13.062254] xhci_hcd 0000:00:10.1: irq 50 for MSI/MSI-X
[ 13.062261] xhci_hcd 0000:00:10.1: irq 51 for MSI/MSI-X
[ 13.062381] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 13.062384] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.062386] usb usb7: Product: xHCI Host Controller
[ 13.062389] usb usb7: Manufacturer: Linux 3.1.0-rc9-1-jan xhci_hcd
[ 13.062391] usb usb7: SerialNumber: 0000:00:10.1
[ 13.062502] xHCI xhci_add_endpoint called for root hub
[ 13.062504] xHCI xhci_check_bandwidth called for root hub
[ 13.062548] hub 7-0:1.0: USB hub found
[ 13.062602] hub 7-0:1.0: 2 ports detected
[ 13.062726] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 13.062736] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8
[ 13.063528] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 13.063590] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.063649] r8169 0000:02:00.0: setting latency timer to 64
[ 13.063718] r8169 0000:02:00.0: irq 52 for MSI/MSI-X
[ 13.064071] ACPI: Power Button [PWRF]
[ 13.064435] r8169 0000:02:00.0: eth0: RTL8168e/8111e at 0xffffc90005cbc000, 10:1f:74:0a:9d:93, XID 0c200000 IRQ 52
[ 13.064634] scsi 2:0:0:0: Attached scsi generic sg1 type 5
[ 13.064751] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned.
[ 13.066650] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
[ 13.066655] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.066657] usb usb8: Product: xHCI Host Controller
[ 13.066659] usb usb8: Manufacturer: Linux 3.1.0-rc9-1-jan xhci_hcd
[ 13.066660] usb usb8: SerialNumber: 0000:00:10.1
[ 13.066810] xHCI xhci_add_endpoint called for root hub
[ 13.066813] xHCI xhci_check_bandwidth called for root hub
[ 13.066856] hub 8-0:1.0: USB hub found
[ 13.066916] hub 8-0:1.0: 2 ports detected
[ 13.067180] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 13.068616] Initializing Realtek PCIE storage driver...
[ 13.068680] rts_pstor 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 13.068997] Resource length: 0x1000
[ 13.069025] Original address: 0xf0100000, remapped address: 0xffffc900057a6000
[ 13.069031] pci->irq = 18
[ 13.069033] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18
[ 13.069048] rts_pstor 0000:04:00.0: setting latency timer to 64
[ 13.071441] cfg80211: Calling CRDA to update world regulatory domain
[ 13.076405] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 13.076412] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 13.076608] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 13.109063] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 13.137347] ACPI: AC Adapter [AC] (on-line)
[ 13.137410] hp_accel: laptop model unknown, using default axes configuration
[ 13.138118] acpi device:02: registered as cooling_device4
[ 13.138209] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 13.138275] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 13.141059] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 13.144484] cfg80211: World regulatory domain updated:
[ 13.144488] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.144490] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.144493] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.144495] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.144497] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.144499] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.155783] mtp-probe[487]: checking bus 4, device 2: "/sys/devices/pci0000:00/0000:00:13.0/usb4/4-2"
[ 13.155950] mtp-probe[484]: checking bus 2, device 2: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-1"
[ 13.157328] mtp-probe[480]: checking bus 3, device 2: "/sys/devices/pci0000:00/0000:00:12.0/usb3/3-1"
[ 13.171851] ifup[600]: Service network not started and mode 'auto' -> skipping
[ 13.200943] mtp-probe[484]: bus: 2, device: 2 was not an MTP device
[ 13.200963] mtp-probe[480]: bus: 3, device: 2 was not an MTP device
[ 13.201305] mtp-probe[487]: bus: 4, device: 2 was not an MTP device
[ 13.212131] acpi device:06: registered as cooling_device5
[ 13.212234] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input8
[ 13.212306] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 13.249633] lis3lv02d: 8 bits 3DC sensor found
[ 13.270275] scsi5 : SCSI emulation for PCI-Express Mass Storage devices
[ 13.270505] rts_pstor: waiting for device to settle before scanning
[ 13.803525] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 13.803530] Disabling lock debugging due to kernel taint
[ 13.875239] [fglrx] Maximum main memory to use for locked dma buffers: 5257 MBytes.
[ 13.875264] [fglrx] vendor: 1002 device: 9647 count: 1
[ 13.875650] [fglrx] vendor: 1002 device: 6741 count: 2
[ 13.875843] [fglrx] ioport: bar 1, base 0x4000, size: 0x100
[ 13.875860] pci 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 13.875866] pci 0000:00:01.0: setting latency timer to 64
[ 13.876382] [fglrx] ioport: bar 4, base 0x3000, size: 0x100
[ 13.876389] pci 0000:01:00.0: enabling device (0000 -> 0003)
[ 13.876393] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 13.876398] pci 0000:01:00.0: setting latency timer to 64
[ 13.876519] [fglrx] Kernel PAT support is enabled
[ 13.876543] [fglrx] module loaded - fglrx 8.90.5 [Oct 12 2011] with 2 minors
[ 13.877153] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input9
[ 13.877505] Registered led device: hp::hddprotect
[ 13.877523] hp_accel: driver loaded
[ 13.918657] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 13.918668] ACPI: Battery Slot [BAT0] (battery present)
[ 13.919055] wmi: Mapper loaded
[ 13.923517] Linux video capture interface: v2.00
[ 13.927320] uvcvideo: Found UVC 1.00 device HP TrueVision HD (5986:02ac)
[ 13.927979] snd_hda_intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 13.927987] ALSA sound/pci/hda/hda_intel.c:2414 Using LPIB position fix
[ 13.928066] snd_hda_intel 0000:00:01.1: irq 53 for MSI/MSI-X
[ 13.928093] snd_hda_intel 0000:00:01.1: setting latency timer to 64
[ 13.932141] ALSA sound/pci/hda/hda_intel.c:1492 Enable sync_write for stable communication
[ 13.935088] input: HP TrueVision HD as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input10
[ 13.935188] usbcore: registered new interface driver uvcvideo
[ 13.935190] USB Video Class driver (1.1.1)
[ 13.935644] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 13.936384] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:01.1/sound/card0/input11
[ 13.936642] input: HP WMI hotkeys as /devices/virtual/input/input12
[ 13.947169] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.947176] ALSA sound/pci/hda/hda_intel.c:2414 Using LPIB position fix
[ 13.955237] ALSA sound/pci/hda/hda_intel.c:1492 Enable sync_write for stable communication
[ 13.964970] ALSA sound/pci/hda/patch_sigmatel.c:5656 mute LED gpio 1 polarity 0
[ 13.964981] ALSA sound/pci/hda/hda_codec.c:4877 autoconfig: line_outs=2 (0xd/0xf/0x0/0x0/0x0) type:speaker
[ 13.964985] ALSA sound/pci/hda/hda_codec.c:4881 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 13.964989] ALSA sound/pci/hda/hda_codec.c:4885 hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 13.964992] ALSA sound/pci/hda/hda_codec.c:4886 mono: mono_out=0x0
[ 13.964994] ALSA sound/pci/hda/hda_codec.c:4890 inputs:
[ 13.964997] ALSA sound/pci/hda/hda_codec.c:4894 Mic=0xc
[ 13.964999] ALSA sound/pci/hda/hda_codec.c:4896
[ 13.965402] ALSA sound/pci/hda/patch_sigmatel.c:3104 stac92xx: dac_nids=2 (0x13/0x14/0x0/0x0/0x0)
[ 13.972214] input: HD-Audio Generic Mic at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[ 13.972433] input: HD-Audio Generic HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
[ 14.085312] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input15
[ 14.109310] rt2800pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 14.109329] rt2800pci 0000:03:00.0: setting latency timer to 64
[ 14.230921] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.231581] Registered led device: rt2800pci-phy0::radio
[ 14.231602] Registered led device: rt2800pci-phy0::assoc
[ 14.231638] Registered led device: rt2800pci-phy0::quality
[ 14.271160] scsi 5:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 14.271385] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 14.271481] Bad LUN (0:1)
[ 14.271651] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 14.271688] Bad target number (1:0)
[ 14.271850] Bad target number (2:0)
[ 14.272130] Bad target number (3:0)
[ 14.272275] Bad target number (4:0)
[ 14.272451] Bad target number (5:0)
[ 14.272619] Bad target number (6:0)
[ 14.272876] Bad target number (7:0)
[ 14.273028] rts_pstor: device scan complete
[ 14.275312] ifup[750]: Service network not started and mode 'auto' -> skipping
[ 14.709172] systemd-fsck[760]: /dev/sda6: sauber, 50207/14737408 Dateien, 6703875/58940928 Bl\xffffffc3\xffffffb6\xffffffb6cke
[ 14.737182] fuse init (API version 7.17)
[ 14.750516] mount[768]: mount: fusectl ist bereits eingeh\xffffffc3\xffffffa4\xffffffa4ngt oder /sys/fs/fuse/connections wird gerade benutzt
[ 14.750853] mount[768]: mount: Laut mtab ist fusectl schon auf /sys/fs/fuse/connections eingeh\xffffffc3\xffffffa4\xffffffa4ngt
[ 14.758465] systemd[1]: sys-fs-fuse-connections.mount mount process exited, code=exited status=32
[ 14.828955] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 14.831316] Adding 6655996k swap on /dev/sda5. Priority:0 extents:1 across:6655996k
[ 15.001445] ntfs-3g[782]: Version 2011.4.12 integrated FUSE 27
[ 15.001456] ntfs-3g[782]: Mounted /dev/sda2 (Read-Write, label "", NTFS 3.1)
[ 15.001463] ntfs-3g[782]: Cmdline options: rw,noexec,nosuid,nodev,users,gid=100,fmask=133,dmask=022,locale=de_DE.UTF-8
[ 15.001470] ntfs-3g[782]: Mount options: rw,noexec,nosuid,nodev,users,allow_other,nonempty,atime,fsname=/dev/sda2,blkdev,blksize=4096,default_permissions
[ 15.001477] ntfs-3g[782]: Global ownership and permissions enforced, configuration type 1
[ 15.001482] ntfs-3g[782]: Warning : using problematic uid==0 and gid!=0
[ 15.088722] boot.fglrxrebuild[783]: Check for rebuild the fglrx kernel module if necessary ...
[ 15.098450] boot.fglrxrebuild[783]: The fglrx kernel module was already built.
[ 15.099831] boot.fglrxrebuild[783]: Check for the fglrx kernel module is running...
[ 15.103734] boot.fglrxrebuild[783]: The fglrx kernel module is loaded.
[ 15.104334] boot.fglrxrebuild[783]: ..done
[ 15.313395] logger[852]: Requesting microcode for AMD fam10h or newer CPU(s)
[ 15.315430] powernow-k8: Found 1 AMD A6-3410MX APU with Radeon(tm) HD Graphics (4 cpu cores) (version 2.20.00)
[ 15.315446] powernow-k8: Core Performance Boosting: on.
[ 15.315518] powernow-k8: 0 : pstate 0 (1600 MHz)
[ 15.315520] powernow-k8: 1 : pstate 1 (1500 MHz)
[ 15.315523] powernow-k8: 2 : pstate 2 (1400 MHz)
[ 15.315525] powernow-k8: 3 : pstate 3 (1300 MHz)
[ 15.315527] powernow-k8: 4 : pstate 4 (1200 MHz)
[ 15.315529] powernow-k8: 5 : pstate 5 (1000 MHz)
[ 15.315531] powernow-k8: 6 : pstate 6 (800 MHz)
[ 15.316938] microcode: CPU0: patch_level=0x0300000f
[ 15.326261] cpufreq[830]: Loading CPUFreq modules..done
[ 15.341543] microcode: CPU1: patch_level=0x0300000f
[ 15.343890] microcode: CPU2: patch_level=0x0300000f
[ 15.346774] microcode: CPU3: patch_level=0x0300000f
[ 15.349362] microcode: Microcode Update Driver: v2.00 , Peter Oruba
[ 15.350188] microcode.ctl[823]: Checking/updating CPU microcode .. AMD fam10h or newer CPU(s) found..done
[ 15.393305] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 15.409647] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 15.415613] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.940755] r8169 0000:02:00.0: eth0: link down
[ 15.942102] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.968384] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.984685] NET: Registered protocol family 17
[ 16.350120] vgaarb: this pci device is not a vga device
[ 16.350144] vgaarb: this pci device is not a vga device
[ 16.350157] vgaarb: this pci device is not a vga device
[ 16.350168] vgaarb: this pci device is not a vga device
[ 16.350179] vgaarb: this pci device is not a vga device
[ 16.350191] vgaarb: this pci device is not a vga device
[ 16.350203] vgaarb: this pci device is not a vga device
[ 16.350214] vgaarb: this pci device is not a vga device
[ 16.350227] vgaarb: this pci device is not a vga device
[ 16.350239] vgaarb: this pci device is not a vga device
[ 16.350251] vgaarb: this pci device is not a vga device
[ 16.350263] vgaarb: this pci device is not a vga device
[ 16.350274] vgaarb: this pci device is not a vga device
[ 16.350286] vgaarb: this pci device is not a vga device
[ 16.350298] vgaarb: this pci device is not a vga device
[ 16.350310] vgaarb: this pci device is not a vga device
[ 16.350321] vgaarb: this pci device is not a vga device
[ 16.350332] vgaarb: this pci device is not a vga device
[ 16.350343] vgaarb: this pci device is not a vga device
[ 16.350358] vgaarb: this pci device is not a vga device
[ 16.350373] vgaarb: this pci device is not a vga device
[ 16.350389] vgaarb: this pci device is not a vga device
[ 16.350404] vgaarb: this pci device is not a vga device
[ 16.350419] vgaarb: this pci device is not a vga device
[ 16.350434] vgaarb: this pci device is not a vga device
[ 16.350449] vgaarb: this pci device is not a vga device
[ 16.350478] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 16.350502] vgaarb: this pci device is not a vga device
[ 16.350519] vgaarb: this pci device is not a vga device
[ 16.350535] vgaarb: this pci device is not a vga device
[ 16.360033] [fglrx] ATIF platform detected with notification ID: 0x81
[ 18.922482] wlan0: authenticate with 00:1f:3f:a6:d3:39 (try 1)
[ 18.924488] wlan0: authenticated
[ 18.924949] wlan0: associate with 00:1f:3f:a6:d3:39 (try 1)
[ 18.928242] wlan0: RX AssocResp from 00:1f:3f:a6:d3:39 (capab=0x431 status=0 aid=1)
[ 18.928249] wlan0: associated
[ 18.933343] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 21.660897] fglrx_pci 0000:00:01.0: irq 54 for MSI/MSI-X
[ 21.661660] [fglrx] Firegl kernel thread PID: 1201
[ 21.661948] [fglrx] Firegl kernel thread PID: 1202
[ 21.662272] [fglrx] Firegl kernel thread PID: 1203
[ 21.662518] [fglrx] IRQ 54 Enabled
[ 21.685375] fglrx_pci 0000:01:00.0: irq 55 for MSI/MSI-X
[ 21.686392] [fglrx] Firegl kernel thread PID: 1204
[ 21.686582] [fglrx] Firegl kernel thread PID: 1205
[ 21.686738] [fglrx] Firegl kernel thread PID: 1206
[ 21.686915] [fglrx] IRQ 55 Enabled
[ 22.017210] [fglrx] Gart USWC size:1280 M.
[ 22.017215] [fglrx] Gart cacheable size:508 M.
[ 22.017221] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 22.017225] [fglrx] Reserved FB block: Unshared offset:f8fc000, size:404000
[ 22.017228] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 22.032063] [fglrx] Gart USWC size:1280 M.
[ 22.032067] [fglrx] Gart cacheable size:508 M.
[ 22.032071] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 22.032074] [fglrx] Reserved FB block: Unshared offset:fbfd000, size:403000
[ 22.032076] [fglrx] Reserved FB block: Unshared offset:1fff4000, size:c000
[ 254.496192] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 255.061794] EXT4-fs (sda6): re-mounted. Opts: commit=0
[ 271.768357] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dsfield-143)
[ 271.768379] ACPI Error: Method parse/execution failed [\_SB_.AC__._PSR] (Node ffff8801a4c74780), AE_ALREADY_EXISTS (20110623/psparse-536)
[ 271.768407] ACPI: Marking method _PSR as Serialized because of AE_ALREADY_EXISTS error
[ 271.768436] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20110623/ac-118)